Hot Vacancies 10

Welding Engineering Specialist

Candidate must have a degree in metallurgy or welding engineering. An M.S. degree or Ph.D. degree in a related field is highly desirable. The candidate must have 15+ years of welding engineering experience in fabrication and manufacturing related to the oil and gas industry

Additional Experience Required

The candidate must be experienced in running welding procedures and codes, ASMES IX, AWS D1.1 and API 1140

The candidate must have been responsible for welding operations, selection of welding procedures and consumables, qualification of personnel and correction of welding problems

Candidate must be knowledgeable of materials and failure mechanisms in the oil and gas industry. Knowledge of "fitness for service" is required. Certification to AWS-CWI or CSWIP is desirable

Knowledge of refinery processes and gas plant operations is desirable; some field work in refineries will be required

Must be able to work in multidisciplinary and multicultural groups, and also be able to pursue work independently

Must be willing to mentor local staff and to provide training programs. Excellent written and spoken English are required

Excellent office computer skills are required

Electrical System Facilities Planning Specialist

Bachelors Degree (Advanced Degree preferred) in
Electrical Engineering. 10 years professional experience (E15+  years preferred)

Experience should cover: 10years professional experience (15+ years preferred); at least 10 years in electrical power distribution and transmission systems planning & operations in a public utility and/or capital program planning

Experience in evaluating existing and designing new substations, switchgear,
and MCCs 480V through 380kv

Experience in performing economic evaluations, feasibility studies and preparing requests for budgetary approvals

Experience with professional consultant in planning and executing engineering studies

Experience in applying and analyzing system simulation and modeling of electrical distribution systems using computer software such as E-TAP and similar software

Experience in conducting market research related to long term evaluation of power export opportunities

Experience in developing corporate strategies and master plans for electrical distribution and transmission systems

Experience in conduction load flow, motor starting, short circuit and dynamic stability studies

Possess excellent written and oral technical presentation skills

Oil Processing Facilities Planning Consultant

BS in Chemical Engineering, with Minimum 15 Years professional
experience - (20+ years preferred) professional experience in oil production, oil processing, facilities planning and capital evaluations

Advance Degree Preferred in MS CHE or PTE

Experience includes the following

Experience in performing economic evaluations, feasibility studies and preparing requests for budgetary approvals

Experience in process/system simulations

Demonstrated excellent written and oral technical presentation skills

Proficient in the use of personal computers

Refining & Petrochemical Facilities Planning Consultant

Bachelor's degree in Chemical Engineering or equivalent technical field. Continues to participate in post-graduate technical seminars and course work on own initiative related to his technical specialty. Incumbent will normally have achieved recognition through activities on committees of professional societies or participation in University sponsored programs. Preferably has a Master of Science degree

Has a minimum of fifteen (15) years experience in the petroleum industry, related industry or governmental sectors. Prior experience will have provided an appreciation of Project Management and Operational problems and their relationship to long range planning of facilities and associated economics. Experience should include at least ten years as individual in responsible charge of planning work in his main technical field. Incumbent will have achieved recognition as the foremost planning expert within and outside of the Company in his technical field based on proven ability to handle complex issues in a rigorous, analytical fashion

Must be able to work with minimum supervision on relatively unstructured tasks. Must have the demonstrated ability to produce top quality written and oral reports

Bldg & Industrial Support Facilities Planning Specialist

BS Degree in Civil or Architectural Engineering; Advanced Degree Preferred, with a minimum of ten years experience. Experience in performing economics evaluations and feasibility studies, and in preparing for budgetary approvals; and possesses excellent written and oral communications and technical presentation skills

Hot Vacancies 9

Reliability Mechanical Engineering Specialist

Candidate must have a B.S. degree in Mechanical Engineering. An M.S. degree or Ph.D. degree is preferred. Must be an experienced (10 years+) reliability professionalAdditional Needed Experience

Must be active in technical committees and have been a lead author of technical papers

Must be up to date with the latest in the various reliability assessments and programs

Travel is required (driving license required), usually within Saudi Arabia, although occasional international trips may also be required

Field work in Company's operating plants will be required

Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independently

Must be willing to mentor local staff and provide training programs

Position is located in a central engineering group responsible for providing consultation to Company's operating plants

Must possess high academic achievement in a closely related discipline with preference for candidates with an advanced degree

Excellent English language writing and speaking skills and good presentation skills required. Excellent office computer skills required

Must possess experience in providing technical support and engineering to the following

Resolution of chronic and sophisticated rotating equipment problems.1

Deployment and facilitation of reliability centered maintenance. 2
Conduct of reliability assessments and benchmarking3

Preferably with SAP knowledge of maintenance module4

Bad Actors Reports Development

Work prioritization strategies

Asset performance management 

Root Cause Analysis

Plant Integrity Management

UPS/DC & Renewable Electrical Engineering Specialist

Candidate must have an M.S. degree in Electrical Engineering. Other acceptable major is Electronics Engineering. Candidate must be an experienced (15 years+) renewable and UPS/DC professional with broad experience in electrical systems.

Additional Experience Required:

“Must be active in IEEE, IEC or other technical committees and have been a lead author of technical papers.

“Must be up to date with the latest Solar systems and UPS/DC technologies and possess the drive to implement appropriately in field operations.

“Field work in Company's plants will be required.

“Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independently.

“Must be willing to mentor local staff and provide training programs.

“Position is located in a central engineering group responsible for providing consultation to Company's operating plants.

“Will possess high academic achievement in a closely related discipline with preference for candidates with an advanced degree.

“Excellent English language writing and speaking and good presentation skills required. Excellent office computer skills required.

Cables & Grounding Systems Electrical Engineering Specialist

Candidate must have a B.S. degree in Electrical Engineering. Other acceptable major will be Electronics Engineering. Candidate with an M.S. degree or Ph.D. is preferred. The candidate must be an
experienced (10 years+)
Power Transmission, Cables and Grounding Systems professional with broad experience in electrical systems.

Additional Experience Required:

Must be active in IEEE, IEC or other technical committees and has been a lead author of technical papers.

Must  be up to date with the latest cables and grounding monitoring technologies and possess the drive to implement appropriately in field operations.

Field work in Company's plants will be required.

Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independentl.

Must be willing to mentor local staff and provide training programs and teach.

Position is located in a central engineering group responsible for providing consultation to Company's operating plants.

Must possess high academic achievement in a closely related discipline with preference for candidates with an advanced degree.

Adjustable Speed Drives Electrical Engineering Specialist

Candidate must have a B.S. in Electrical Engineering. Other acceptable major will be Electronics Engineering. A candidate with an M.S. degree or Ph.D. is highly desirable. The candidate must be an experienced (10 years+) Adjustable Speed Drives (ASD) and Solid State Controllers professional with broad experience in electrical systems.

Additional Experience Required:

Must be active in IEEE, IEC or other technical committees and have been a lead author of technical papers.

Must be up to date with the latest ASD technologies and possess the drive to implement appropriately in field operations, in addition to the ability to commission and troubleshoot VSDs in the field.

Field work in Company'sv plants will be required.

Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independentl.

Must be willing to mentor local staff and provide training programs.

Position is located in a central engineering group responsible for providing consultation to Company's operating plants.

Must possess high academic achievement in a closely related discipline with preference for candidates with an advanced degree.

Power Systems Electrical Engineering Specialist

Candidate must have an M.S. degree in Electrical Engineering. Must be experienced (12 years+) in power system analysis and design with broad experience in power protection. Must be familiar with ETAP, CYME and harmonic study. Must be an active member in electrical technical committees and have been a lead author of technical papers. Must be willing to work in multidisciplinary, multicultural groups and also be able to pursue work independently.

Hot Vacancies 8

Fired Heaters & Boilers Mechanical Engineering Specialist

Must have a B.S. degree in Mechanical Engineering. A candidate with an M.S. degree is preferred. Must have 15 years+ professional experience in fired heaters and boilers with broad experience in design check, performance enhancement, troubleshooting, and failure analysis of fired heaters and boilers

Additional Needed Experience
Must have good experience in refractory design and installation

Must be up to date with the latest technologies in his field and possess the drive to implement appropriately in field operations

Travel is required (driving license is required), usually within Saudi Arabia although occasional international trips may also be required

Field work in company’s plants will be required

Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independently

Must be willing to mentor local staff and provide training programs

Position is located in a central engineering group responsiblefor providing consultation to company’s fired heaters and boilers

Excellent English language writing and speaking skills and good presentation skills required

Excellent office computer skills required

Heat Exchanger Mechanical Engineer

Candidate must have a B.S. degree in Mechanical Engineering; an M.S. degree is preferred

 Must have 15 years+ of professional experience in heat exchanger, broad experience in design check, performance enhancement, troubleshooting, and failure analysis of heat exchangers

 Must be up-to-date with the latest technologies in his field and possess the drive to implement these appropriately in field operations

 Travel is required (driving license is required), usually within Saudi Arabia, although occasional international trips may also be required

Field work in company’s plants will be required

Must be able to work in multidisciplinary, multicultural groups and also be able to peruse work independently

 Must be willing to mentor local staff and provide training programs

 Position is located in a central engineering group responsible for providing consultation to company’s fired heaters and boilers

Excellent English language writing and speaking and good presentation skills required

 Excellent office computer skills required

Vessels & Tanks Mechanical Engineering Specialist

Must have a B.S. degree in Mechanical Engineering. Candidate
must possess 15 years+ of relevant experience in the discipline of pressure vessels and storage tanks, with
most of the experience in the
 design and troubleshooting of relevant field problems, with preferably at least 50%
 of that time having been spent in a central engineering support group or equivalent consulting role

Additional Needed Experience

Must have a broad experience in the design and analysis of pressure vessels and storage tanks and comprehensive exposure to their manufacture and erection process

Must have an in-depth working knowledge of relevant industry standards (API and ASME)

Must be able to work in multidisciplinary and multicultural groups

Excellent command of the English language is a must, both written and spoken

Excellent computer skills is required

Upstream Corrosion Engineering Specialist

Candidate with an M.S. degree in Corrosion Engineering is preferred. Other acceptable majors are: Chemical Engineering, Materials Sciences, Materials Engineering, Chemistry and other related sciences. The candidate must be an experienced (10 years+) corrosion professional with Chartered Engineering, NACE Specialist or equivalent certification with broad experience in corrosion control in upstream operations

Additional Experience Required

Must be active in NACE or  other technical committees and have been a lead author of technical papers

Must be up to date with the latest technology and possess the drive to implement appropriately in field operations

Field work in upstream facilities will be required

Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independently

Must be willing to mentor local staff and provide training programs

Position is located in a central engineering group responsible for providing consultation on upstream corrosion control supporting field engineering staff

Must possess high academic achievement in a closely related discipline with preference for candidates with an advanced degree

Excellent English language writing and speaking and good presentation skills required

 Excellent office computer skills required

Experience with corrosion prediction programs would be beneficial

Downstream Corrosion Engineering Specialist

Candidate with M.S. degree in Corrosion is preferred. Other acceptable majors are: Metallurgy, Materials Engineering, Materials Science, Chemical Engineering, Chemistry and other related sciences. Position is located in a central engineering group responsible for consultation in corrosion control supporting field engineering staff and other engineering services departments. It requires an experienced (15+ years) professional with corrosion management expertise in both field and corporate locations

Additional Experience Required:

Must have the ability to understand and resolve integrity issues and be able to lead and be part of multidisciplinary troubleshooting teams

Must be innovative and be up to date with the latest technology and possess the drive to implement appropriately in field operations

Experience with corrosion prediction programs would be beneficial

Travel required, usually within Saudi Arabia for short periods, though occasional international trips may also be required

An advanced degree or certification will be a plus

Active participation in NACE or other technical committees is necessary and publication of technical papers is expected

Excellent English language writing and  speaking as well as reporting skills are required

Experience with the use  of corrosion software and latest corrosion monitoring techniques will be a plus

Must be willing to mentor local staff and provide training  programs


Hot Vacancies 7

DSS Application & Data Historians

The candidate should have as a minimum a B.S. degree in Engineering (Chemical, Electrical or Computer Science) with a minimum of 10+ years experience in the Real-time Systems and Automation area

Experience Includes the Following

The candidate should be experienced in Information Systems, specifically in Real-Time data historians, such as the OSI Soft PI system, Honeywell Experian and Yokogawa Exaquantum

Experience related to application interfaces in the Process Control environment is highly desirable

PA Lifecycle Management Engineer

B.S. degree in Chemical, Electrical or Computer Engineering with a minimum of 15+ years of professional experience as an engineer in responsible for and in charge of technical work in their field of specialty

Professional certification, Professional Engineer (P.E.) or Chartered Engineer (C.E.) license or registration is highly desirable

Experience Includes the Following

Previous experience with PA systems such as: Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), SCADA & RTU, Compressor and Turbine Control, Vibration Monitoring Systems (VMS) is required

Previous experience with several automation systems used, such as: Honeywell TDC3000 and Experion, Yokogawa Centum and Prosafe, Foxboro I/A, Triconex ESD, Emerson Provox and DeltaV, GE Mark Series, and CCC

Previous experience with a major international oil and gas company and/or previous employment with one of the above automation suppliers are desirable

Candidate will have participated as lead engineer in major automation system upgrade projects

Onshore Structural Engineering Specialist

Candidate must have an M.S. degree in Civil Engineering. Must possess 20 years+ post graduation experience, with extensive experience in detailed structural design with preferably at least 50% of that time spent working on projects in the oil and gas or industry

Additional Experience Required

Must have an in-depth knowledge of structural engineering principles and the ability to reflect them in engineering projects from conceptual to detailed engineering stages

Candidate must have extensive experience in the design of buildings, industrial plant structures and foundations using both steel and concrete. Must have experience with the design of foundations subjected to dynamic loads and be fully familiar with seismic and blast design principles

Candidate must be fully familiar with hands-on design in the structural engineering discipline with versatility in the use of structural design software and International/industry codes and standards

Must be able to work in multidisciplinary, multicultural groups and also be able to work independently

Driving license is required

Crane & Hoist Engineering Specialist

Must have a B.S. degree in Civil/Structural Engineering. Must possess 8 years+ of post graduation experience in related industry with most experience in crane operations, inspection and troubleshooting with preferably at least 50% of that time spent in a central engineering support group or equivalent consulting role

Additional Needed Experience

Must have the experience to facilitate the review of different types of cranes and provide recommendations. Must have an excellent command of the English language. Must have excellent computer skills

HVAC, Plumbing & Utilities Mechanical Engineering Specialist

Must have a B.S. degree in Mechanical Engineering. Candidate must possess 15 years+ of post graduation experience in HVAC, Plumbing and Utilities. Preferably at least 50% of his experience spent with a central engineering support group or equivalent consulting role

Additional Needed Experience

Must have broad experience in design check, performance enhancement, troubleshooting, and failure analysis of HVAC, Plumbing and Utilities

Must be up to date with the latest technologies in his field and possess the drive to implement appropriately in field operations

Travel is required (driving license is required), usually within Saudi Arabia, although occasional international trips may also be required

Field work in company’s plants will be required

Must be able to work in multidisciplinary, multicultural groups and also be able to pursue work independently

Must be willing to mentor local staff and provide training programs

Position is located in a central engineering group responsible for providing consultation to company’s fired heaters and boilers

Excellent English language writing and speaking skills and good presentation skills required

Excellent office computer skills required

Hot Vacancies 6

Pipeline Simulation Engineering Specialist

B.S. degree in Engineering with 10 years with (major Mechanical or Chemical Engineering with Advance Degree preferred). Experience should be in pipeline simulation applications

Experience Includes the Following

Candidate should have extensive knowledge to conduct economic studies and cost analysis of pipeline systems. Candidate should possess excellent computer skills as well as excellent oral/written presentation skills

B.S. degree in Engineering (major Chemical Engineering with Advance Degree preferred) with 10 years of experience in gas processing/gas and liquid dehydration, hydrate formation and inhibition and NGL recovery systems

Experience Includes the Following

Extensive knowledge to conduct economic studies and cost analysis of different gas and liquid dehydration, hydrate formation and inhibition and NGL recovery systems. The candidate also should have extensive knowledge in gas and liquid dehydration, hydrate formation and inhibition and NGL recovery

NGL Recovery & Fractionation Specialist

B.S. degree in Engineering (major Chemical Engineering) with 10 years of experience in NGL recovery and fractionation systems.

Experience Includes the Following

The candidate should have extensive knowledge to conduct economic studies and cost analysis of different NGL recovery and fractionation systems

Sulfur Recovery Specialist

B.S. degree in Engineering (major Chemical Engineering with Advance Degree preferred) with 10 years of experience in Sulfur Recovery

Experience Includes the Following

Candidate should have extensive knowledge to conduct economic studies and cost analysis of different Sulfur Recovery systems of both gas plants and refineries. The candidate should also possess excellent computer skills as well as excellent oral/written presentation skills

Engineering Specialist, Instrumentation-Mechanical

BS Chemical, Electrical or Mechanical Engineering with 12 years experience (Advance Degree preferred with Majors in Control System/Process Dynamics)

Experience includes the following

Field experience in the oil and gas industry with wide variety of instrument and control installations. This includes selection and installation of field instruments, transmission systems and final control elements. Specific experience is required with various types of control valves and pressure relieving devices. Candidate must be very knowledgeable with national and international standards specially the ISA, API and IEC. Candidate must have excellent written and verbal English skills with experience in developing and presenting technical reports. Candidate must be computer literate with advance level of experience in use of office and technical software. Experience with DCS is plus point. Also some experience with maintenance of instrumentation and valves is preferred

Engineering Specialist, Dehydration, Hydrate Formation and Inhibition and NGL

B.S. degree in Engineering (major Chemical Engineering with Advance Degree preferred) with 10 years of experience in gas processing/gas and liquid dehydration, hydrate formation and inhibition and
NGL recovery systems.

Experience Includes the Following:

Extensive knowledge to conduct economic studies and cost analysis of different gas and liquid

dehydration, hydrate formation and inhibition and NGL recovery systems. The candidate also should have extensive knowledge in gas and liquid dehydration, hydrate formation and inhibition and NGL

recovery

Hot Vacancies 5

Downstream Oil & Gas R&D

Ph.D. or Master’s Degree in a relevant oil and/or gas application preferred

A minimum of 10 years of experience related to R&D in the oil market and industrial collaboration management

Excellent interpersonal, communication, and presentation skills

Self-motivation,exemplary people skills and a strong work ethic

Gas and Liquid Sweetening Specialist

Bachelors Degree in Chemical Engineering (Advanced Degree preferred). A minimum of 10 years experience in gas processing/gas & liquid sweetening. Incumbent should have extensive knowledge to conduct economic studies and cost analysis of different sweetening systems

Other related experience includes

Company is seeking an Engineering Specialist with extensive experience in sour gas & liquid sweetening processes. Incumbent should have extensive knowledge to conduct economic studies and cost analysis of different gas and liquid sweetening systems

Incumbent should possess excellent computer skills as well as excellent oral/written presentation skills

Flare & Relief Systems Specialist

Bachelors Degree in Chemical Engineering (Advanced Degree preferred). A minimum of 10 years field experience including three years as an engineer in responsible charge of technical work in the field of flare & relief systems of major plants which should include Petroleum refineries or Gas processing plants or Gas Oil separation plants, pipelinesOther related experience includes

Company is seeking an Engineering Specialist with extensive experience in Flare & Relief Systems in Upstream & Downstream Petroleum processing. As a recognized company expert in this filed, the candidate will provide professional advice and guidance to Company organizations, outside vendors, manufacturers, and design firms relating to flare & relief systems

Incumbent must be proven expert within industry recognition through activities in professional societies and industrial organizations such as API, DIERS and others

Incumbent should have an excellent knowledge of process simulation software packages such as FLARENET/FLARESIM/HYSYS/PROII

Proven written and verbal skills in developing and presenting technical reports

Incumbent should possess excellent communication skills and interpersonal skills with willingness to impart knowledge across the company

Hot Vacancies 4

Metallurgical Engineering Specialist

Candidate must have a B.S. degree in Metallurgy or higher (an M.S. degree is preferred). He must have a minimum experience of (10 years) in metallurgical engineering, materials selection/testing and failure analysis

Additional Experience Required

Experienced in steel Microstructural characterization/analysis. Understanding the effect of the heat treatment and chemical composition on mechanical and material properties

Experienced in fracture mechanics, heat treatment and sour service damage mechanisms

knowledgeable in metallic materials selection in Oil and Gas sector

Experienced in environmental cracking damage mechanismsSkilled in mechanical damage mechanisms and interpretation of fracture face. This includes familiarity with fracture surface examination by utilizing the optical and Scanning Electron Microscopes

Technical report writing skills

Nonmetallic Engineering Specialist

Candidate must have an M.S. degree in Nonmetallic Materials Engineering. Other acceptable majors are: Chemical Engineering, Materials Sciences, Materials Engineering, Chemistry and other related sciences

Additional Experience Required

High knowledge in thermoplastic, fiber reinforced thermoset, elastomers and their related products including piping, tanks and vessels, liners for carbon steel piping, downhole tubing and casing, composite repair systems, etc

 Excellent knowledge in nonmetallic products, piping, valves, etc., qualifications and testing

In-depth knowledge in nonmetallic piping and other structures international engineering standards and specifications

 Familiarization in nonmetallic piping, tanks and vessels manufacturing, thermoplastic lining processes, piping installation and hydrotesting

Good knowledge in corrosion and its mitigation methods

Excellent presenter, high convincing ability, excellent technical report and publication papers writing skills and ability to mentor and teach

Good field experience including processes and equipment

Engineering Specialist in Energy Simulation & Integration

BS Engineering with 10 years with (major Chemical Engineering with Advance Degree preferred), experience should be in process simulation applications

Experience includes the following

Candidate should have extensive knowledge to conduct economic studies and cost analysis of facilities and systems. Candidate should possess excellent computer skills as well as excellent oral/written presentation skills. Familiar with energy optimization tools and software

Energy Optimazation Engineering Specialist

BS in Mechanical or Chemical Engineering with Advance Degree preferred with 10 years of experience in process simulation and optimization applications

Experience includes the following

Candidate should have extensive knowledge to conduct economic studies and cost analysis of facilities and systems. Candidate should possess excellent computer skills as well as excellent oral/written presentation skills

Prof Dev/Trng Adv III

A. BA or BS Degree in Human Resources, Counseling, Education or related fields

B. Four (4) years' experience in the applicable field preferably in the assigned area. A working knowledge of the concerned organization's structure, job requirements, and opportunities

C. Thorough knowledge of spoken and written English. Arabic comprehension is desirable

Hot Vacancies 3

 Piping and Pipelines Engineering Specialist

Must have a B.S. degree in Mechanical Engineering or Civil Engineering. Candidate must possess 15 years+ of post graduation experience in design and construction of pipelines and piping, with preferably at least 50% of the time spent in central engineering support groups or equivalent consulting roles

Additional Experience Required

Candidate must be knowledgeable and up to date with the latest ASME- B31.3, ASME B31.4 and ASME B31.8. Must be knowledgeable in API 579, Piping Fitness for Service (FFS) evaluations

Must be willing to mentor local staff and provide training programs

Excellent command of the English language is a must, both spoken and written

Excellent computer skills is required

Outstanding track record of achievement in process development and leadership of research program

Excellent track record of innovation

Interpersonal and communication skills

Team building and team management skill

Incumbent should have several publications and may serve as an expert reviewer for journals and scientific societies

Likely to hold patents on inventions in areas of his expertise

Incumbent will have had experience as a research project leader

Should also have had experience in developing research projects to be carried out by more junior specialists

Valves Mechanical Engineering Specialist

Must have an M.S. degree in Mechanical Engineering. Must possess 15 years+ of post graduate experience in the valves industry, with most of the experience in valve troubleshooting and preferably at least 50% of the time was spent in a central engineering support group or equivalent consulting role

Additional Needed Experience

Must have broad experience in the design and analysis of pressure vessels and storage tanks and comprehensive exposure to the manufacturing and erection aspects

This requires an in-depth working knowledge of relevant industry standards (API and ASME) requirements and fluency in using advanced analytical software

Must have up-to-date knowledge of the process aspects related to the oil industry (production and refining)

Must be able to work in a multidisciplinary and multicultural groups

Must have an excellent command of the English language, both written and spoken

Engineering Specialist, Instrumentation-Electrical

B.S. degree in Electrical Engineering with 12 years experience (Advance Degree preferred with Major in Control System/Electronics)

Experience Includes the Following

Field experience in the oil and gas industry with a wide variety of instrument and control installations. This includes selection and installation of field instruments, cables, enclosures, trays and grounding. Specific experience is required with hazardous area applications. He must be very knowledgeable with national and international standards, especially the NEC and IEC. He must have excellent written and verbal English skills with experience in developing and presenting technical reports. He must be computer literate with an advance level of experience in use of office and technical software. Experience with DCS is a plus. Also, experience with gas detection, motor operated valve actuators and vibration monitoring systems is preferred

Gas/NGL Processing Facilities Planning Consultant

Minimum Requirement

BS in Chemical Engineering, with Minimum 15 Years professional experience - (20+ yrs preferred) professional experience: at least 15 yrs in gas processing and NGL operations and/or capital program planning

Advance Degree Preferred in Chemical Engineering or Economics

Experience includes the following

Experience in performing economic evaluations, feasibility studies and preparing requests for budgetary approvals

Experience with professional consultant in planning and executing engineering studies

Experience in process/system simulation of gas processing and NGL operations

Demonstrated excellent written and oral technical presentation skills

Proficient in the use of personal computers

Gas Turbine Specialist

 Bachelors Degree in Mechanical Engineering (Advanced Degree preferred in Mechanical Engineering). A minimum of 10 years experience related to the position

Hot Vacancies 2

Electrical/Reliability Engineering Specialist

Minimum Requirements
MS degree in Electrical Engineering (PhD desired) with a minimum of 15 years experience in the reliability of electrical system, preferred in oil, gas or petrochemical field that includes monitoring, control with greater emphasis on protection; preparation of materials specifications and engineering standards; technical review of project design and specifications; substation automation solutions and technologies; field investigations during blackouts and contingencies, and technical support to operating facilities for issues related to protection and automation. Good background and experience on the reliability field, reliability analysis, reliability improvement. Experience with the asset performance management implementation, monitoring and improvement

Pipefitter/Fabricator Skills Trainer

Minimum Requirements
A minimum of 10 years post training experience as a Pipefitter/Fabricator/Metals Technician. Experienced in the fabrication of pipe, plate, and structural assemblies of carbon steel, alloys steel, nonferrous and nonmetallic materials in a shop environment. Applicant must be fluent in English Language, both oral and written. Have completed a full Technician Apprenticeship and received internationally recognized qualifications. Successful candidate must be current in the field and able to capitalize on self-development opportunities when made available

Energy System Engineering Specialist

Minimum Requirements
BS degree (Advanced Degree preferred) in Electrical / Mechanical/ Chemical Engineering with 10 years experience in the field of solar systems design, operation and development as well as energy systems optimization

Industrial Computer Engineer

Minimum Requirements
Bachelor Degree in Engineering or Computer Science. Typically has 7+ years experience in the field of Automation. A thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes, standards and specifications. Proficient in oral and written English

Fuel Formulation

Minimum Requirements
• A PhD in organic chemistry and 10+ years of fuel formulation and synthesis experience. Candidate must have a proven track record in innovation and product development; excellent verbal and written communication skills; creative problem solving skills and team skills. The ideal candidate will also have experience in stage-gate project management as well as sufficient exposure to fuel refining and oil industry.

Substation design Engineer

Required Experience
• The candidate must have at least seven plus years of experience in the design of Electrical medium and high voltage substations
This includes
• Equipments layouts, Cable Racking system, Grounding details, protective relay schemes, single line diagrams. CT, PT, DC, AC and Grounding Calculations
• Develop wiring diagrams, cable schedules, interface details and bills of materials

Protection and Control Engineer

Required Experience
• The candidate must have at least seven years of experience in the design and application of utility protective relaying and control systems
• This will include being responsible for the specification, calculation, and design of relay protection schemes such as feeder, transformer, busbar, OHL, synchronizing and control panels
• This experience will be used for medium and high voltage substation

Scheduler/planning Engineer

Required Experience
Assist in Setting up of the internal and external scheduling methodology MS project / primavera
Compile and control the project schedule
Report to PM and CPM by any delay and its consequences
Assist in checking of contract target date before order placing decisions
Schedule controlling, compilation of schedule analysis and preparation of potential solution in case of schedule delays in cooperation with the project team
Compile customer project reporting
Perform project scheduling in cooperation with PM and CPM
Additional to that he will prepare the claims related to time delay in cooperation with PM and CPM
More than 8 years of experiences
Will be added value if he has already worked on a High /Medium Voltage Substation

Hot Vacancies 1

A.C. Foreman

Candidates should possess a Diploma from a reputed institute and he should have at least 5 – 6 years experience in A.C. installation, testing and commissioning. He should also be able to handle the site including supervising of technicians, materials etc

Electrical Engineer

Candidates should possess a Diploma from a reputed institute
with at least 5 – 6 years experience in Electrical works including design, estimation, material orders

Electrician Foreman

Candidates should posses a Diploma from a reputed institute with 5 – 6 experience in electrical works and he should also be handle the site including supervising of technicians, materials etc

Plumbing Engineer

Candidates should possess a Diploma from a reputed institute
with at least 5 – 6 years experience in Electrical works including design, estimation, material orders

Quantity Surveyor

Candidates should possess a Degree or a Diploma from a reputed Institute with at least 5 – 6 years experience in Estimation of all Electro-mechanical works Related to Tenders for various projects

A.C. Site Engineer

Candidate should possess a Mechanical Engineering Degree or a Diploma from a reputed institute and he should have at least 6 – 7 years experience in supervising A.C. works at site including for chilled water system etc. He should be able to design and handle calculation of material requirements

A. C. Maintenance Engineer

Candidates should possess a Diploma from a reputed institute and he should have at least 5 – 6 years experience in A.C. maintenance works at site including chilled water system etc. He should also be able to design and handle calculation of material requirement